Helmet fans and cooling systems
- NoslenLRAc
- Posts: 51
- Joined: Wed Sep 10, 2008 3:19 am
- TKID: 2275
- Location: Grand Rapids, MI
Re: Helmet fans and cooling systems
I've just started experimenting with fans for my DP. One of our garrison members bought a bunch of different sized fans at cost and will be selling those to Legion members.
Anywho... I will be posting pics of my final mods when done. My problem is my big head. The DP is tight, but I like the look (that and I'm too cheap to spend the big bucks for a FP or CP model - paid $125 for the DP).
Right now, it looks like I will use a "Nidec Gamma27" (model A35236-57) fan mounted just below my chin. The fan will blow air UP in front of my face, and with the air vents on my new visor, should keep the visor dry and me cool. Unfortunately, I must mount the fan after I put the helmet on with velcro, as the fan is larger and will suck up the top of my robes.
More info as I upgrade!
Anywho... I will be posting pics of my final mods when done. My problem is my big head. The DP is tight, but I like the look (that and I'm too cheap to spend the big bucks for a FP or CP model - paid $125 for the DP).
Right now, it looks like I will use a "Nidec Gamma27" (model A35236-57) fan mounted just below my chin. The fan will blow air UP in front of my face, and with the air vents on my new visor, should keep the visor dry and me cool. Unfortunately, I must mount the fan after I put the helmet on with velcro, as the fan is larger and will suck up the top of my robes.
More info as I upgrade!
In service of the Emperor,
TR-2275
Carl Nelson (aka Noslen L'Rac)

TR-2275
Carl Nelson (aka Noslen L'Rac)

- NoslenLRAc
- Posts: 51
- Joined: Wed Sep 10, 2008 3:19 am
- TKID: 2275
- Location: Grand Rapids, MI
Re: Helmet fans and cooling systems
DONE!
I'll post my pics on the Helmet mods page...
I'll post my pics on the Helmet mods page...

In service of the Emperor,
TR-2275
Carl Nelson (aka Noslen L'Rac)

TR-2275
Carl Nelson (aka Noslen L'Rac)

Re: Helmet fans and cooling systems
and the chemicals won't interfere with your hearing. . .


Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq. Inactive
Building a ROTS Guard. . .
TX-4361 FL Garrison, Tampa Bay Sq. Inactive
Building a ROTS Guard. . .
Re: Helmet fans and cooling systems
The all famous question...how to cool the RG.....
I have multiple costumes and this one BY FAR is the hardest to breath in. It works much better as an indoor costume.
I have multiple costumes and this one BY FAR is the hardest to breath in. It works much better as an indoor costume.
- NoslenLRAc
- Posts: 51
- Joined: Wed Sep 10, 2008 3:19 am
- TKID: 2275
- Location: Grand Rapids, MI
Re: Helmet fans and cooling systems
Yeah, but do I ever get the respect on those outdoor troops!!! That and pity...
In service of the Emperor,
TR-2275
Carl Nelson (aka Noslen L'Rac)

TR-2275
Carl Nelson (aka Noslen L'Rac)

Re: Helmet fans and cooling systems
I don't have any fans in there but I use a respirator for the breathing part.
something like this might work http://cgi.ebay.com/LOT-OF-2-MSA-POWERE ... 7C294%3A50
Mine isn't powered and a half mask with out the face shield. Hose runs down to the belt. This way I breath in cool air and do not breath in exhaled CO2.
Works well, sometimes have fogging but not bad. If I tighten up the mask good enough breath goes down.
something like this might work http://cgi.ebay.com/LOT-OF-2-MSA-POWERE ... 7C294%3A50
Mine isn't powered and a half mask with out the face shield. Hose runs down to the belt. This way I breath in cool air and do not breath in exhaled CO2.
Works well, sometimes have fogging but not bad. If I tighten up the mask good enough breath goes down.
Re: Helmet fans and cooling systems
You can take it one step further like I did - 2 fans , one on either side of the lens that has a small gap - here the key - have one sucking air in - and the other blowing out, keeps good circulation.
Re: Helmet fans and cooling systems
You can check my thread on cooling.
http://www.forcepike.net/forum/viewtopi ... =34&t=1036
I am planning on improving the build a bit and then I'll post some new pics of the build.
http://www.forcepike.net/forum/viewtopi ... =34&t=1036
I am planning on improving the build a bit and then I'll post some new pics of the build.
Detect - Deter - Defeat
Re: Helmet fans and cooling systems
I've actually got 3 fans in my bucket (it's a fiberglass one). I've got 2 on the cheeks blowing upwards towards my ears, and one right above my visor pointed down blowing towards my nose. I've also got a gap at the bottom of my visor. Is this perfect? No. Does it at least give me a sense of air movement? Absolutely! Also, there are times where I get my shoulders hunched just right and it allows me to get what feels like a super cold flow of air up my neck and into the top of my head circulating. When that happens it feels like a bucket of ice water has been poured on my head. For the record...that's a good thing.