SL-13377 Dawn Brights Pratorian Guard Breakdown

[kylo ren]

[Foxhound621]

I've stared at the shirt long enough to also have come to the conclusion it's NOT a pebbeled material. It's a shimmery red fleece like shirt, I've seen the material at a local fabric store, and it looks just like it. The pants are pebbeled, no idea on an exact match for those though

[Foxhound621]

There are far more details on the kit, what's shown is only like an 8th lol

[Motoss]

Thank you for this Dawn. It is the best breakdown that is somewhere I can actually find it. Once the CRL is done I will definitely be looking at sewing these soft parts myself (my most ambitious sewing yet!) thanks to these patterns and fabric closeups.

[DarkFather]

The CRL for this costume can't come fast enough.

I am gutted I was unable to suit up as an official 501st PG for this films release. As soon as we have a CRL and a vetted list of makers/parts providers I'll definitely be spending my monies.

[MooreSR2371]

Thank You Dawn for all you do!!! This is why I said you were my Kylo Godmother!!!!


XOXOXOXOXO

[kylo ren]

Thank you so much all! Happy to help. Heres some mock up stuff I wrote based on images we have attained and from the film.

Please yell at me if anyone sees something off. <3


Here are some High Rez Images I took at FIDM: https://imgur.com/a/JbR9i

Heres some images for the CRL its a zombie of parts. Thanks Ramey and William. <3


Pratorian Guard CRL





Helmet

Helmet Option A



Bullet Shaped Helmet
-The helmet is proportional to the wearer and gloss cherry red.
-The helmet has an approximately .5 (half) inch lip around the entire top of the helmet.
-The dome is round at the top.
-Slits line the front of the helmet, they are approximately 1 mm apart from each other.
-The helmet is smooth gloss cherry red.
-Six ovals and an approximately 3 (three) inch rectangle design decorate the back of the helmet.
-The side of the helmet has a clip on one side.

Helmet Option B



Knight Helmet

-The helmet is proportional to the wearer and gloss cherry red.
-Features a wide side view. The top front is pointed upwards and angles down around the costumers face.
-The front of the face plate is covered in lines approximately 1 millimeter apart.
-The back of the helmet is pointed at the top.
-The helmet has a dome shape feature around the top of the costumers head.
-Two elongated ovals are at the back left of the helmet. One circle at the right center and four lines below at the right and left.

Helmet Option C

Samurai Helmet

-The helmet is proportional to the wearer and gloss cherry red.
-The front of the helmet is covered in lines approximately 1 (one) millimeter apart.
-The lines end at a lip approximately ¾ (three forths) the way down the helmet and arches upwards.
-The bottom portion in the front of the helmet also arches like the top face plate.
-The top of the helmet features a wing flap. The flap arches around the costumers head approximately 2-3 inches on either side of the main helmet

Shoulder Armor



-The shoulder armor is cherry red high gloss and is semi circular shaped.
-The shoulders are suspended approximately an inch above the arms.

Arms



-The arms are made of 8 cherry red high gloss sections.
-Includes one plate at the top that sits on top of the arm panels.
-The arm section designs are identical on both arms, however they are mirrored.
Each arm portion is suspended from one piece to the next using strapping or black or red para cord.
-The designs on each piece is unique and each piece becomes smaller the closer to the glove it is.
From largest to smallest:
A cap that matches the raised shoulder cap. It sits atop the arms covering the costumers shoulder. This piece is void of any ornamental design.
Piece A: Front: insert info here based on info above*
Piece B: Front: insert info here based on info above*
Piece C: Front: insert info here based on info above*
Piece D: Front: insert info here based on info above*
Piece E: Front: insert info here based on info above*
Piece F: Front: insert info here based on info above*
Piece G: Front: insert info here based on info above*
Piece H: Front: insert info here based on info above*


Gloves



-Leather or leather like satin sheen.
-Cherry red and has ornamental lines stitched across the top of the hand ¾ inch apart.


Torso Armor
(front and back)





-The torso armor is made up of two sections. A Top section that ends at the ribs and a lower smaller section that sits on the lumbar.
-Two bands of trim wrap around the collar of the armor
The front top just below the trim has a small blue square on the top portion of the chest and lines that wrap around the square and end at the right edge of the armor.
-On the left there are two ovals and a line on the left hand side.
-The lower section has a square that is on the top right and a line on the left.
-Two more lines are present on the outer sides of the details.
The chest armor sits atop the torso armor.
The back portion of the torso armor wraps atop the front.
Back section has five long vent lines that step downwards. There is a line on either side after the vents that extends to the bottom of the armor.
There are four ovals at both inner sides of the lines

Stomach Armor


-Made from a material that has stable form in gloss cherry red.
-Front has two vertical lines that meet with the skirt panels. They are located at the center of the thigh.
-A horizontal center line wraps around the stomach area and intersects with the two vertical lines.
-Two lines arch from the outside section of the horizontal line. They arch out and meet at the center section.

Shirt



-Shirt is made from a cherry red cracked finish polyester fabric.
-A balaclava can be built into the shirt.
-Approximate 2 inch collar with a center seam and .5 inch wool trim at the top.
-Shirt is form fitting.

Skirting



-The skirting consists of 4 (four) belled skirts.
-Twill wool or wool like material in cherry red.
-The two side skirts overlap the front skirts and are floor length.

Level 2

-The skirting is double layered.
-The back skirt has a center seam running vertical top to bottom.
-The skirts can show no signs of seams however if seams are present they are sewn at the edges and finely pressed.
-The skirt is un-hemmed at the bottom.

Pants



-Pants are made from a black semi-sheen fabric that is form fit to the body.
-The pants are free of visible pockets or zippers.

Level 2

-Pants are made from a resin coated polyester fabric such as Neoprene or zentai suit.
-Small cracks form on the outer layer of the pants.

Leg Armor


-Leg armor is gloss cherry red and extends from the knee to the ankle.
-The ankle portion wraps around the leg and angles down at the ankle. It closes in the back with a square clip extending from the back portion.
-The leg armor has a slit up the side and a oval at the bottom front portion. There are two rectangular designs affixed to the top of the leg and a semicircular knee cap plate.
-The inside of the leg armor does not have a clip holding the armor together.

Boots


-Cherry Red Leather shoes that match the sheen of the gloves. If a closure is present it is in the inside.
-The soles are black.

Level Two

-Soles are flat black rubber.
-Zipper on the inside of the shoe is covered by a flap that is velcroed.
-Shoes have a side panel that is double stitched vertically at the sides and wraps around the back of the shoe. The panel does not continue to the top it ends ¾ of an inch above the top cap.
-Includes a double stitched cap at the top.

[LuciousTalvloinne]

Command will be looking over these over the week and such and will "Yell" if anything is wrong.

[Foxhound621]

That needs a bit of work done to it before that'll be the CRL

[Sascha_Wilsing]

That needs a bit of work done to it before that'll be the CRL

I think if Detachment staff said we will look over it, it is not on you to say what is CRL worthy or not.
And you have allready been warned to keep a little more patience and post less destructive and unworthy things.
We appreciate help but will keep away from posts that are in no way constructive.
So lets Staff handle this please.