Page 5 of 7
Re: Shadow Guard Build
Posted: Wed Nov 13, 2019 2:04 pm
by Allan1313
Maxall wrote:Silly question. I'm working on my Kama. Can I attach/stitch the kama straight to my under suit or does it HAVE to be attached to the belt?
Obviously, I would have the belt over top of the kama. Didn't know if that was an approvable method or not.
Thanks,
Dave
I used Velcro on the belt and Kama. That way I can make minor adjustments and if it needs to be washed it can.
Re: Shadow Guard Build
Posted: Sun Jan 05, 2020 8:21 pm
by Maxall
Re: Shadow Guard Build
Posted: Sun Jan 05, 2020 8:40 pm
by LuciousTalvloinne
For it being the kit that it is not a bad build. You can add either velcro to the ab section to let the belt rest or a notch tab. This will help from a gap forming between an plate and belt.
Re: Shadow Guard Build
Posted: Sun Jan 05, 2020 9:47 pm
by Allan1313
Looks good. I agree with Stephen, get some Velcro or something on the belt and ab piece so it doesn't move and create that gap. The Kama came out good and sits correctly. You should be good as long as the helmet is proper.
Re: Shadow Guard Build
Posted: Sun Jan 05, 2020 9:51 pm
by Sith Lord
Iron the kama
Re: Shadow Guard Build
Posted: Thu Jan 09, 2020 10:37 pm
by Maxall
v/r,
Dave
Re: Shadow Guard Build
Posted: Fri Jan 10, 2020 2:19 am
by Maxall
So, I screwed up on the belt. The belt that I have has sizing holes and a rivet. Both of which are verboten on the CRL. So, where has everyone else found belts? I looked at Tandy Leather, but they only go up to 1.5" in width.
Re: Shadow Guard Build
Posted: Fri Jan 10, 2020 3:15 am
by Sith Lord
Have you been declined, as they seem to be approving belts with the rivet. Not sure abut the extra hole though, That probably is not approvable.
Check my build thread for how I did mine.
https://www.forcepike.net/forum/viewtop ... =16&t=3574
Re: Shadow Guard Build
Posted: Fri Jan 10, 2020 3:24 am
by Allan1313
Maxall wrote:So, I screwed up on the belt. The belt that I have has sizing holes and a rivet. Both of which are verboten on the CRL. So, where has everyone else found belts? I looked at Tandy Leather, but they only go up to 1.5" in width.
I used
https://www.facebook.com/TiggwolfCreations/
They have the grooved style as well. Just need to ask for it without the rivet.
Re: Shadow Guard Build
Posted: Tue Jan 21, 2020 9:39 pm
by Maxall
Submitted my updated pics to my MLO over the weekend. They said that they were posting them on the GML board here for review.
I guess now is when the knives come out, huh?
https://imgur.com/a/lkkNQVI