Squirrel's Don Post Helmet repair and paint

As seen in the video game "The Force Unleashed". Now an approved costume!

User avatar
Squirrel
Posts: 73
Joined: Fri Jan 02, 2009 7:12 am
Location: Tampa, Fl.
Contact:

Squirrel's Don Post Helmet repair and paint

Post by Squirrel »

Hey all, aquired a Don Post RG Helmet from our XO, and have just completed major repairs

Here's how it looked when I got it:
Image

Image

Image

I taped up all the cracks on the outside with blue painters tape, and super-glued the cracks from the inside. I then allowed the glue to set-up, and peeled the tape off. *If the tape did not stick to an area because of the super-glue, I put a fresh piece on, and re glued that area.*
At which point I began sanding down the ledges formed by the glue, and smoothed everything out.
Image

Image

Image

Image

Image
Last edited by Squirrel on Wed Aug 19, 2009 6:40 pm, edited 1 time in total.
Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .

User avatar
Squirrel
Posts: 73
Joined: Fri Jan 02, 2009 7:12 am
Location: Tampa, Fl.
Contact:

Re: Squirrel's Don Post Helmet repair and paint

Post by Squirrel »

Then I took it outside and primed it.
Image

Image

Image

Image

I then took it back inside and wet-sanded every surface.
Image

Image

Image

Image

Image

I have installed the visor, using VELCRO! So I can take it out for cleaning. The red tint will be added later.
Image

When I have cash, I will be getting the black paint and the gloss coat (it's a secret!)

:shadow:
Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .

User avatar
REDEYE
Posts: 53
Joined: Sun Feb 01, 2009 1:04 am
Location: Jacksonville, FL

Re: Squirrel's Don Post Helmet repair and paint

Post by REDEYE »

Looks like you put allot of work into it, and it looks good. What color red are you going to use? Are you going to paint it yourself or take it to the shop?
Image

http://swcelebrationvorlando.blogspot.com/

Legion Celebrity Liaison
TR/TK/TB/SL-1741

User avatar
Squirrel
Posts: 73
Joined: Fri Jan 02, 2009 7:12 am
Location: Tampa, Fl.
Contact:

Re: Squirrel's Don Post Helmet repair and paint

Post by Squirrel »

REDEYE wrote:Looks like you put allot of work into it, and it looks good. What color red are you going to use? Are you going to paint it yourself or take it to the shop?
Negative, red-eye. The helmet will be black. I'm doing a shadow guard. As for the paint, I'll be doing that myself most likely. Unless I suddenly come into more money than my self-control can handle.

:shadow:
Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .

User avatar
Jedi_Outcast77
Posts: 114
Joined: Sat Jan 31, 2009 5:09 pm
Location: Dracut, MA
Contact:

Re: Squirrel's Don Post Helmet repair and paint

Post by Jedi_Outcast77 »

WOW and I thought I had some tough repairs. Your reconstruction was way more involved. Hreat job Squirrel.
Mike - 501st NEG IC-7796
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco

User avatar
REDEYE
Posts: 53
Joined: Sun Feb 01, 2009 1:04 am
Location: Jacksonville, FL

Re: Squirrel's Don Post Helmet repair and paint

Post by REDEYE »

Squirrel wrote:
REDEYE wrote:Looks like you put allot of work into it, and it looks good. What color red are you going to use? Are you going to paint it yourself or take it to the shop?
Negative, red-eye. The helmet will be black. I'm doing a shadow guard. As for the paint, I'll be doing that myself most likely. Unless I suddenly come into more money than my self-control can handle.

:shadow:

Gotcha.


Did you use fiberglass in the repair, I can't tell?

BTW...the finished looks great!
Image

http://swcelebrationvorlando.blogspot.com/

Legion Celebrity Liaison
TR/TK/TB/SL-1741

User avatar
Squirrel
Posts: 73
Joined: Fri Jan 02, 2009 7:12 am
Location: Tampa, Fl.
Contact:

Re: Squirrel's Don Post Helmet repair and paint

Post by Squirrel »

Negative again Red-eye. No fiberglass used yet. I was debating on doing that later. I tried a coating of Resin, but the resin was too old and did not adhere properly. It had to be ripped out at the expense of a previous repair attempt. It was so bad, I deleted the pics from my phone. I have the second coat of black on, and might have another small, very small, fix to do for smoothness. Not sure. Next up, the clear coat.


Admins, care to make this a sticky on how to fix a Don Post?

:shadow:
Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .

User avatar
Squirrel
Posts: 73
Joined: Fri Jan 02, 2009 7:12 am
Location: Tampa, Fl.
Contact:

Re: Squirrel's Don Post Helmet repair and paint

Post by Squirrel »

Also, if you looked at the before pics, the side of the visor area was completely FUBAR. I reconstructed this by following the steps I used for the rest of the helmet with one exception: When I was sanding the seams down, I pushed all the "dust" into the void. I then covered the area in superglue on the outside and inside. this gave me a medium to work with for filling that gap. This method only works if you put the dust in the area first. Don't try to mix it, then move it, it doesn't work! Patience is the key in this situation. it will not dry instantly like usual. You must wait for it to cure.

:shadow:
Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .

User avatar
Jedi_Outcast77
Posts: 114
Joined: Sat Jan 31, 2009 5:09 pm
Location: Dracut, MA
Contact:

Re: Squirrel's Don Post Helmet repair and paint

Post by Jedi_Outcast77 »

I found the same to be true with the ABS glue I used. It would dry and harden almost to the touch pretty fast but it wasn't solid or sand-able until a few days later. Once again, great job Squirrel! :D
Mike - 501st NEG IC-7796
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco

User avatar
Squirrel
Posts: 73
Joined: Fri Jan 02, 2009 7:12 am
Location: Tampa, Fl.
Contact:

Re: Squirrel's Don Post Helmet repair and paint

Post by Squirrel »

Thank ya much!

:shadow:
Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .

Post Reply