RMoreno95 's Shadow Guard WIP
RMoreno95 's Shadow Guard WIP
Hello everybody
I began my project at november. My shadow guard kit is all by SEBASTIAN GOLAS ( Helmet, chest, back, abdominal plate, shoulder belts, vambrace, shinguards and spats. It came with rivets and snaps like this
All is good but helmet was worst, and paint was bad too
Due to this, I painted, after sanding and prainting
Back of Helmet
Chest
Back
Abdominal Plate
Shoulder Bells
Shin guards
Spats
( It's my firt problem due to I riveted this piece) ( Solution in nexts post)
Finally, me with any parts of armor ( My face into the helmet is very happy )
I began my project at november. My shadow guard kit is all by SEBASTIAN GOLAS ( Helmet, chest, back, abdominal plate, shoulder belts, vambrace, shinguards and spats. It came with rivets and snaps like this
All is good but helmet was worst, and paint was bad too
Due to this, I painted, after sanding and prainting
Back of Helmet
Chest
Back
Abdominal Plate
Shoulder Bells
Shin guards
Spats
( It's my firt problem due to I riveted this piece) ( Solution in nexts post)
Finally, me with any parts of armor ( My face into the helmet is very happy )
Re: RMoreno95 's Shadow Guard WIP
Next parts of this shadow guard that I made was the suit and Kama. Suit came with any pockets...
Easy solution...
Furthermore, Kama was big...too big
After cut, this look like this..
And belt of course
Kama + Belt
Gloves
And boots
Easy solution...
Furthermore, Kama was big...too big
After cut, this look like this..
And belt of course
Kama + Belt
Gloves
And boots
Last edited by RMoreno95 on Sun Jan 29, 2017 12:50 am, edited 1 time in total.
Re: RMoreno95 's Shadow Guard WIP
The next step was very strong form me....the vambrace.
Vambrace of GOLAS are untrimmed. My arm is thin, so I decided cut any more.
The first problem: joins of forearm are very pronounced
Green line zone is bad...but good. Red Line zone is very bad, contrast is very high
I decided sanding and caulking again, with more putty
Nevertheless, after sanding and painting, I decided to sanding...AGAIN ( joins are pronounced still)
After all this work my worktable is very crazy
I finally got it :)
After all this suffering, I made my saber pike(home made)
After painting looks like better
Vambrace of GOLAS are untrimmed. My arm is thin, so I decided cut any more.
The first problem: joins of forearm are very pronounced
Green line zone is bad...but good. Red Line zone is very bad, contrast is very high
I decided sanding and caulking again, with more putty
Nevertheless, after sanding and painting, I decided to sanding...AGAIN ( joins are pronounced still)
After all this work my worktable is very crazy
I finally got it :)
After all this suffering, I made my saber pike(home made)
After painting looks like better
Re: RMoreno95 's Shadow Guard WIP
All piece join with snaps
I'm so thin and chest press abdomen . Despite this, there are velcro to reinforce.
In the first messaje, I put my spats with rivet. After any time with drill...
Some of putty, sanding and painting ( and work with snaps, like the other pieces of my armor)...
My vewfinder was bad too, so I put one of one friend like present
I'm so thin and chest press abdomen . Despite this, there are velcro to reinforce.
In the first messaje, I put my spats with rivet. After any time with drill...
Some of putty, sanding and painting ( and work with snaps, like the other pieces of my armor)...
My vewfinder was bad too, so I put one of one friend like present
Re: RMoreno95 's Shadow Guard WIP
I Hope review by DL
- Sascha_Wilsing
- Former DL
- Posts: 1401
- Joined: Tue Jan 22, 2013 2:48 pm
- TKID: 12112
- Location: Recklinghausen, Germany
Re: RMoreno95 's Shadow Guard WIP
This looks much much better then the pics you first send to your gmo.
You should now be ready to receive your TR ID.
You should now be ready to receive your TR ID.
-
- Posts: 17
- Joined: Thu Nov 03, 2016 10:56 pm
- TKID: 11910
Re: RMoreno95 's Shadow Guard WIP
yeah my friend
- LuciousTalvloinne
- Former DL
- Posts: 2243
- Joined: Mon Sep 08, 2008 4:38 am
- TKID: 4126
- Location: Star Garrison
- Contact:
Re: RMoreno95 's Shadow Guard WIP
The kama should not wrap that much around towards the front.
It should stop at the side seams of the pants.
Lucious Talvloinne TR-4126 (Stephen Davenport)
Costume Referencer 08-09 Detachment XO 09-10 Detachment CO 10-11 Detachment CO 11-12 Detachment XO 12-13 Detachment XO 13-14 Detachment X0 14-15 Detachment Mentor 15-17 Detachment CO 17-18
Owner of Carnor Jax - Captain Argyus - Revenge of the Sith Royal Guard - Force Unleashed Royal Guard
Costume Referencer 08-09 Detachment XO 09-10 Detachment CO 10-11 Detachment CO 11-12 Detachment XO 12-13 Detachment XO 13-14 Detachment X0 14-15 Detachment Mentor 15-17 Detachment CO 17-18
Owner of Carnor Jax - Captain Argyus - Revenge of the Sith Royal Guard - Force Unleashed Royal Guard
Re: RMoreno95 's Shadow Guard WIP
The kama is a bit big, trim it down a bit.
But looks good.
How did you make the spike?
But looks good.
How did you make the spike?
Re: RMoreno95 's Shadow Guard WIP
I made with Pvc tube and insulating foam ( and paint of same black of armor) and a blade of custom saber
Sorry. I don't know why my photos are turned
Sorry. I don't know why my photos are turned