Jedi_Outcast's saber staff
- Jedi_Outcast77
- Posts: 114
- Joined: Sat Jan 31, 2009 5:09 pm
- Location: Dracut, MA
- Contact:
Jedi_Outcast's saber staff
I've got a base design that I'm working on and have some images to share. I used the Hyperspace image as a guide but need to find a better quality copy to do some fine tuning. I know that it is supposed to be all black but to make it easier to view I made it grey with some parts black to highlight their details. After some time and discussions have passed I will be working on a dimensioned drawing to help others with this weapon.
Mike - 501st NEG IC-7796
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Re: Jedi_Outcast's saber staff
How much progress have you made so far?
- Jedi_Outcast77
- Posts: 114
- Joined: Sat Jan 31, 2009 5:09 pm
- Location: Dracut, MA
- Contact:
Re: Jedi_Outcast's saber staff
I haven't made any more progress as of late. Things should be slowing down at work so I'll have more time to put into this. I also spoke with a guy in my garrison that makes sabers and will be working with him to start machining the grips as soon as I can get a drawing to him.
Mike - 501st NEG IC-7796
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Re: Jedi_Outcast's saber staff
Who's doing this in our Garrison? I may be in for this project too.
- Jedi_Outcast77
- Posts: 114
- Joined: Sat Jan 31, 2009 5:09 pm
- Location: Dracut, MA
- Contact:
Re: Jedi_Outcast's saber staff
Ummm... ME .luckyxero wrote:Who's doing this in our Garrison? I may be in for this project too.
Mike - 501st NEG IC-7796
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Re: Jedi_Outcast's saber staff
I guess that was my question.....who makes sabers in NE?Jedi_Outcast77 wrote: I also spoke with a guy in my garrison that makes sabers......
- Jedi_Outcast77
- Posts: 114
- Joined: Sat Jan 31, 2009 5:09 pm
- Location: Dracut, MA
- Contact:
Re: Jedi_Outcast's saber staff
Ohh, now I get it . I'm going to talk with Randy about making the grips and emitter sections. I may try doing resin pieces that would fit over PVC pipe, but both ideas are still way down the road.luckyxero wrote:I guess that was my question.....who makes sabers in NE?Jedi_Outcast77 wrote: I also spoke with a guy in my garrison that makes sabers......
Mike - 501st NEG IC-7796
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Re: Jedi_Outcast's saber staff
Neat CAD art!
Jonathan 'Squirrel' Cardin
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .
TX-4361 FL Garrison, Tampa Bay Sq.
Building a ROTS Guard. . .
Re: Jedi_Outcast's saber staff
Ye, nice CAD - Too bad there is no measurements on it
- Jedi_Outcast77
- Posts: 114
- Joined: Sat Jan 31, 2009 5:09 pm
- Location: Dracut, MA
- Contact:
Re: Jedi_Outcast's saber staff
One of these days I will finish making the scale drawing that I started. Its come a long way since I started a year ago but I just haven't had the time to get it done. I promise you guys will be the first to see it, I promise .
Mike - 501st NEG IC-7796
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco
Walk Now for Autism Research 2009 - Team Brunco
http://www.freewebs.com/teambrunco