Home of the Sovereign Protectors

Feel free to use this guide to share your helmet measurements. Please avoid the name of private helmet crafters as we don't want to get anybody shut down. In an ideal world we could try and get a line up of different helmets next to each other so we can see the size differences. But that is in the future. And yes...this is an image from the animated Clone Wars which was release (not sure if they ever made it into the show?) so the shape is slightly off but it's the best I could find.

<edited to add F - temple measurement (external)>

Results:
FP (South America) - fiberglass
A: 432mm
B: 152.5mm
C: 38mm
D: 330mm
E: 368.5mm
F: 209.5mm

SB (Birmingham UK) - fibreglass
A: 420mm
B: 170mm
C: 33mm
D: 337mm
E: 357mm
F: 230mm

SB (uk)
A=450
B=170
C=35
D=340
E=365
F=220

I'll be taking and posting measurements from my Don Post helmet from the '90s, my new Rubies helmet (which makes up for all the dreck they've put out over the years, IMO), and my CT helmet. Armor party this weekend, so perfect setting for such.

--Jonah

***edited by command for content***

Does anyone have the dimensions for the Rubies Supreme? Especially the length and width of the neck hole.

FP (South America) - fiberglass
A: 432mm
B: 152.5mm
C: 38mm
D: 330mm
E: 368.5mm
F: 209.5mm

Note that this was done with a metal tape measure in inches and translated. I wouldn't call these scientific measurements, but rather real close measurements.

Thank you for posting this Jester. Much appreciated!

SB (Birmingham UK) - fibreglass
A: 420mm
B: 170mm
C: 33mm
D: 337mm
E: 357mm
F: 230mm

Measurements taken with hard wooden ruler.

My own hat measurement is 57cm, and there is quite a lot of space inside.

(is it OK to write the full name of the vendor, or do we have standard initials for this individual?)

Vendor I would fo with initials and location

Thanks, modified my post accordingly.

SB (uk)

A=450
B=170
C=35
D=340
E=365
F=220

Rubies Measurement









Smallest part of opening


Smallest part of opening