I: A Crimson Empire Carnor Jax costume MUST have:
Helmet: Helmet must be of solid construction based upon design of the
Royal Guard characters with modifications to personify the “Sovereign Protectors”. The modification/addition is the vertical Mohawk that runs between the front and rear ridges of the normal royal guard helmet and can be seen in several panels of the CE/CE2 visual reference. Visor should have a red, non-reflective lens that allows maximum visibility but hides the wearer’s features. The center part of the helmet with the visor should come up
to a triangular point.
Bodysuit: Bodysuit must be constructed of red form fitting material
(ex: lycra/spandex) with black accents running vertical along the torso to the thigh.
Cloak/Cape: Cloak/Cape outer shell must be constructed of black
non-reflective, heavyweight material; inner lining must be constructed also of black,
lightly-reflective material. Cloak/Cape must hang no higher than the
individual wearer’s calves and no lower than the individual wearer’s
ankles. Cloak/Cape must have at least one opening to allow for movement
and ability to be worn draped over one shoulder. Cloak/Cape closure
method cannot be part the bodysuit or armor and must function separately.
Body Armor: Body armor must be gloss black in color and consist of the
following components:
- Shoulder Bells: Shoulder bells must be shaped to mimic the visual
reference and must have a “scalloped” layer beneath the first layer.
- Backplate: Backplate must be shaped to mimic the visual reference.
-Chest Plates: Chest plates must be shaped to mimic the visual reference
and must contain or show bi-lateral division of the individual plates.
-Abdominal Plates: Abdominal plates must be shaped to mimic the visual
reference and must contain or show sectional division between plates. A
minimum of 3 (three) abdominal plates is required but no more than 8
(eight).
All body armor components must be secured to the costumer’s bodysuit by
either 1) harness/strapping system, 2) Velcro/Snaps, and cannot hang free.
Vambraces/Gauntlets: Vambraces/Gauntlets must be shaped to mimic the
visual reference and gloss black in color. Must consist of a minimum of 4 (four), but not more than 8 (eight), raised ridges running vertically along the outer side of the vambrace/gauntlet.
Gun Belt: Gun belt must be black in color and consist of; holster, a minimum
of 2 (two) but not more than 3 (three) pouches and a buckle. The buckle
and pouch design must mimic the visual reference.
• A DH-17 heavy blaster pistol:The Crimson Empire comics depict the DH-17 as being their blaster. Either the MR edition or Hasbro Toy DH-17 (modified) is acceptable.
Boots: Boots must be black in color and come to a point at the opening at the top of the wearer’s thigh. Boots must reach a length higher than the wearer’s knees but must be lower than the wearer’s groin. They should have a relatively conservative heel, no visible straps/buckles, or ornamental stitching.
Gloves: Gloves must be red in color and match the visual reference. Gloves must cover the wearer’s hand. Gloves must have a minimum of 1 (one) accent; 1) horizontal ribbing across the back of the hand, or, 2) circular “knuckle pads” across the fist of the glove.
Force Glaive: Glaive should be no smaller than 1ft/30.48cm in length taller than the costumer from blade tip to blade tip, and mimic the visual reference with detail on the grip area and blade pommels.
II: A Crimson Empire Carnor Jax costume SHOULD have (but not required):
Cloak/Cape: Cloak/Cape outer shell should be constructed of black velvet; inner lining must be constructed of black cloth material.
Canor Jax CRL Standards
Kir Kanos, Carnor Jax, Sqall Training Uniforms, and other armored guards as seen in the Crimson Empire comics
Return to “Crimson Empire Sovereign Protectors”
Jump to
- General
- ↳ Welcome to the Sovereign Protectors Forum!
- Tutorials/Resources
- ↳ Tutorials
- ↳ Helmet Mods
- ↳ Where do I find?
- Costumes
- ↳ Episode II: AOTC Red Guard
- ↳ Episode III: ROTS Royal Guard
- ↳ Episode III: ROTS Senate Guard
- ↳ Episode VI: ROTJ Royal Guard
- ↳ Imperial Praetorian Guard
- ↳ CRL Discussion
- ↳ Resource images
- ↳ Build Threads
- ↳ Sourced materials
- ↳ Episode VIII Elite Praetorian Guard
- ↳ Weapon Design
- ↳ Sword
- ↳ Whip
- ↳ Heavy Glaive
- ↳ Pike
- ↳ Armour
- ↳ Arms
- ↳ Chest
- ↳ Back
- ↳ Shins
- ↳ Belt
- ↳ Soft Parts
- ↳ Boots
- ↳ Gloves
- ↳ Pants
- ↳ Shirt
- ↳ Robes
- ↳ General Discussion
- ↳ The Force Unleashed Shadow/Royal/Senate Guards
- ↳ Crimson Empire Sovereign Protectors
- ↳ Guard Weapons
- ↳ Prequel Force Pike
- ↳ Ceremonial Blaster Rifle
- ↳ ROTJ Force Pike
- ↳ Shadow Guard Saber Pike
- ↳ Crimson Empire Glaive
- ↳ Costumes with CRL in development
- ↳ Rogue One: Royal Guards
- ↳ Other Costumes
- ↳ **Not 501st approved costumes**
- ↳ Imperial Royal Guard Academy Uniform
- ↳ Sun Guard
- ↳ Dark Empire Imperial Sentinels
- ↳ Coruscant Guard