Seattle RG WIP

The Imperial Royal Guard costume as seen in Return of the Jedi

V-cell
Posts: 218
Joined: Sun Jun 16, 2013 5:02 am
TKID: 12221
Location: San Diego

Re: Seattle RG WIP

Post by V-cell »

Hello again needanID,

Keep in mind that for the ROTJ Royal Guard, the gloves will be covered by the inner tunic. This means two things, make your sleeves wide enough so that this is easy to do and, from my perspective I'd follow the same rules as if you were getting fitted for a suit. You should be able to grasp the bottom part of the sleeve once you cusp your hand backwards. This will give you comfort and a great look.

Hope that helps.
Alejandro Uribe-Benninghoff
TR-12221

needanID
Posts: 24
Joined: Wed Nov 12, 2014 4:31 am

Re: Seattle RG WIP

Post by needanID »

Thanks for the input V-Cell. :trsuit:

needanID
Posts: 24
Joined: Wed Nov 12, 2014 4:31 am

Re: Seattle RG WIP

Post by needanID »

Hello all. Sorry about the delay. Work and grad school got the better of me. Now that the semester is over I can start up work again. I was about to hem the sleeves and bottom of the robe but I figured the hems could change once I got my obi on. So getting to that, the standard is 3-4 inches wide with a 1 inch strip in the middle? With a height of 6' I figure 4 inches would look better. Is there a pattern that is recommended?

User avatar
LuciousTalvloinne
Former DL
Posts: 2243
Joined: Mon Sep 08, 2008 4:38 am
TKID: 4126
Location: Star Garrison
Contact:

Re: Seattle RG WIP

Post by LuciousTalvloinne »

Its all ratio pretty much. As most folks are roughly around the 6 foot 1.83 meter height 3 was the average and 1 for the middle was so that it was centered.
Lucious Talvloinne TR-4126 (Stephen Davenport)
Costume Referencer 08-09 Detachment XO 09-10 Detachment CO 10-11 Detachment CO 11-12 Detachment XO 12-13 Detachment XO 13-14 Detachment X0 14-15 Detachment Mentor 15-17 Detachment CO 17-18
Owner of Carnor Jax - Captain Argyus - Revenge of the Sith Royal Guard - Force Unleashed Royal Guard

needanID
Posts: 24
Joined: Wed Nov 12, 2014 4:31 am

Re: Seattle RG WIP

Post by needanID »

OK. This is what I came up with as a idea for the obi. This is still a work in progress and I didn't want to sew up the edges to get a 3-4" wide obi till I was sure I was on the right track. The middle is an inch wide.
Image

Some other sashes on here look like a 1 inch ribbon, others have a visible seam 1" strip others might be a 1" hidden seam.

User avatar
LuciousTalvloinne
Former DL
Posts: 2243
Joined: Mon Sep 08, 2008 4:38 am
TKID: 4126
Location: Star Garrison
Contact:

Re: Seattle RG WIP

Post by LuciousTalvloinne »

That works too - I have a two part but if you can simulate the two parts in one in my opinion that if fine.
Lucious Talvloinne TR-4126 (Stephen Davenport)
Costume Referencer 08-09 Detachment XO 09-10 Detachment CO 10-11 Detachment CO 11-12 Detachment XO 12-13 Detachment XO 13-14 Detachment X0 14-15 Detachment Mentor 15-17 Detachment CO 17-18
Owner of Carnor Jax - Captain Argyus - Revenge of the Sith Royal Guard - Force Unleashed Royal Guard

User avatar
Sascha_Wilsing
Former DL
Posts: 1401
Joined: Tue Jan 22, 2013 2:48 pm
TKID: 12112
Location: Recklinghausen, Germany

Re: Seattle RG WIP

Post by Sascha_Wilsing »

This should work. Nice idea btw.

JesterTDA
Posts: 995
Joined: Fri Jul 23, 2010 3:10 am
TKID: 9392

Re: Seattle RG WIP

Post by JesterTDA »

Sascha_Wilsing wrote:This should work. Nice idea btw.
Agreed, this is a great idea

needanID
Posts: 24
Joined: Wed Nov 12, 2014 4:31 am

Re: Seattle RG WIP

Post by needanID »

Ok. I think the inner robes are done. I had my wife measure twice and she swears the hem is 3 inches from the ground.
Image

Image

Image

Now to start on the outer robes.

User avatar
LuciousTalvloinne
Former DL
Posts: 2243
Joined: Mon Sep 08, 2008 4:38 am
TKID: 4126
Location: Star Garrison
Contact:

Re: Seattle RG WIP

Post by LuciousTalvloinne »

That looks great. The outer robes will just need to be a tad longer to cover the underrobes but not overly long to be stepped on or dragging on the ground.
Lucious Talvloinne TR-4126 (Stephen Davenport)
Costume Referencer 08-09 Detachment XO 09-10 Detachment CO 10-11 Detachment CO 11-12 Detachment XO 12-13 Detachment XO 13-14 Detachment X0 14-15 Detachment Mentor 15-17 Detachment CO 17-18
Owner of Carnor Jax - Captain Argyus - Revenge of the Sith Royal Guard - Force Unleashed Royal Guard

Post Reply