Forearms and Chestplate- Assembly and Strapping https://i.ibb.co/DDm77fC/20231010-215555.jpg Once the replacement pieces were received, I started on the forearms. First I figured out how much overlap I needed in front and back to fit my forearms and hand. Important thing to note with this Jim kit i...

Abs and Yoke- Hip plate holes, racing fins and strapping For the yoke, I decided to use a strip of 2” webbing with snaps across the gap of the yoke, to match up with snap plates on the chestpiece. Make sure to add some slack to this one since it will need some stretch to properly snap onto the ches...

Bell and Bicep- Strapping and padding Based on my research, I know that the bells and biceps are connected via webbing straps with adjustable buckles and partially velcro-ed onto the undersuit. The bells are also connected to the top shoulder of the yoke via short black webbing straps. I played aro...

Shin greeblie attachment and strapping Next up are the shins. I glued on the recessed clip greeblies with superglue, and used 2-part epoxy for the kitkat greeblies. From experience with the TLJ-PG, these greeblies tend to get smacked on corners and walls, so they need to be stuck on strong. https:/...

Welcome and good luck! Bug us anytime for any questions

Abs: Strapping I decided to start with the abs. My thought was to use 2-3 wide (1.5”-2”) webbing straps and buckles to close the back, with a suspender rig to keep it up. Since all attachment points would be hidden by the chestpiece and cape, I also decided to not use snap plates and just add snaps...

Dry-Fitting Once I received my prototype undersuit from Crowprops, I decided to throw everything together for a test fit to help me figure out problem areas and general construction notes.c https://i.ibb.co/Z1Bdnvy/20230829-195127.jpg For the meantime, I used my TLJ-Praetorian skirt as a substitute...

Vibro Double-Blade (Vibro-Arbir) While I waited for some more items to come in for the armour and soft parts, I decided to get at least one of the weapons printed. As we had a lot more references to work with for the Vibro Double-Blade, that was the first weapon Nic of Empire3d modelled and so I st...

Castle Emerald wrote: ↑Tue Aug 22, 2023 9:48 am Sure I`ll request for approval with local GML. I was looking for an advice and cosultation here on forums

Of course! Im just saying that along with us here, make sure you also go to your GML with any questions. We all want to help! Good luck!

Hi Fives, I think you've posted this on the wrong subforum. I'll ask someone to move it to a different sub!